SURVEYING – Live Survey Modules

This module allows you to:

1. Connect with the instrument via bluetooth.
2. Put the instrument in station with 2 prisms.
3. Add a station to the drawing.
4. Mark the wall on the face automatically.
5. Manually section survey of the drift.
6. Indicate the direction of drilling.
7. Look for drilling guides lines
8. Erase a survey station, guide lines or dimension lines
9. Show the laser position in the drawing.
10. Standard setup of the instrument on a known location and at the right orientation
11. Measure point
12. Measure a drilling hole by measuring 2 points on the rod inserted in the hole.
13. Do a continuous manual scan to draw a point cloud.
14. Do a continuous manual scan to draw a polyline.
15. Point the center line on the face at selected height.
16. Mark the roof and floor automatically.
17. Measure the overbreak and underbreak of the face.
18. Search a selected point.
19. Search a line according the shown offset.
20. Search the actual contour of the drift to compare with the plan contour.
21. Manually point the desired height of the slope line on the wall.
22. Center the screen on the current position of instrument.
23. Return to plan World and set the UCS to world.
24. Center and set the windows scale.
25. Set the windows scale.
26. Show distance between 2 points
27. Draw the dimension between two points.
28. Turn on or off the laser of the instrument
29. Switch between 2D Wireframe and Shaded view.
30. Open a drawing from the tablet directory.
31. Push the drawings on the server.
32. Pull the drawings from the server.
33. Save the drawing and shutdown the computer.